1 10

East Coast Driveline

2020-2023 BMW M3 /M4 xDrive AWD G80 G82 G83 HD 1 Piece Carbon Fiber or Aluminum Driveshaft. BMW OEM 26-10-7-908-448, 26107908448, 26-10-9-501-826, 26109501826

2020-2023 BMW M3 /M4 xDrive AWD G80 G82 G83 HD 1 Piece Carbon Fiber or Aluminum Driveshaft. BMW OEM 26-10-7-908-448, 26107908448, 26-10-9-501-826, 26109501826

$4,395.00 USD
$4,395.00 USD
Sale Sold out
Style
ADD New HD Chromoly Housing/300M Bar Pair of Axles: Rated 1000+HP

Made to Order 1 - 2 Weeks lead to build and ship

Made in either 3.5”x.125” HD Aluminum, 3.0”x.125” Carbon Fiber (3.25”OD), or 3.0”x.155” Carbon Fiber (3.31”OD). Both made with Billet Aluminum 105mm Transmission Adapter plate and U-Joint Flange Yoke. Rear 27 Spline Custom made Yoke.

****MUST SHIP REAR SECTION OF ORIGINAL DRIVESHAFT FOR CUSTOM CONVERSION YOKE TO BE MADE FOR DIFFERENTIAL****

 

****ATTENTION**** Be aware of rear side of gas tank bracket stud! RECOMMEND YOU CUTTING BOLT OFF TO PREVENT DRIVESHAFT BEING DAMAGED AND VOIDING WARRANTY!

OAL length is 52.402” or 1331mm

SKU: 26-10-7-908-448

Description:

M4, awd. Awd, without hybrid, with M3.

Replaces: 26-10-9-501-826

BMW M3 Comp. M xDrive Sedan 2022, 2023

BMW M3 CS Sedan 2023

BMW M4 Comp. M xDrive Coupe 2022, 2023

BMW M4 Competition Convertible 2022, 2023

MAKE IT A KIT WITH NEW CHROMOLY AXLES. 

Much Stronger and Flexible Racing Style Driveshaft made to withstand high torque and horsepower. (Gets rid if the weak Rubber Coupler on Transmission, no more hanger bearing, Strengthens and coverts the Rear CVJ to a HD Flange and U-Joint Setup

**Carbon Fiber driveshaft made with 3”ID x .125” Tubing, solid 1350 Series U-Joints and Billet Aluminum Flange Yokes with Front coupler delete Adapter. Custom Made Differential Adapter with spline and threads. 

**Aluminum driveshaft made with 3.5”x .125” Tubing, solid 1350 Series U-Joints and Billet Aluminum Flange Yokes with Front coupler delete Adapter. Custom Made Differential Adapter with spline and threads. 

2020-2023 G80/G82/G83 BMW M3 UPGRADED AXLES : Full Chromoly Inner CV Housings with Billet Internals, 300M Axle Bars and 300M Differential Splined Plugs and 8-ball Forged Outer CV housings with specially Heat Treated Hub Splines to ensure that these axles will fit like stock while handling everything you throw at them, from the Modded Daily driver to hardcore 1200HP+ Race Cars!

DRIVESHAFT AND AXLES are non-refundable after installation

Terms and Conditions

Due to the intended use of high performance products, East Coast Driveline Inc. ("ECD”) products and each part thereof, are sold "AS IS” and with all faults. To the fullest extent allowed by law, ECD Racing Products makes NO written, oral, expressed, or implied statement of warranty or guarantee on any product or part sold. ECD will not be liable for any direct, indirect, incidental, consequential, or special damages, including but not limited to, damage, injury, loss of life, loss of property or equipment, loss of profits or revenue, or claims from any individual or entity arising from the use of any ECD product. 

RACING IS A DANGEROUS ACTIVITY AND PURCHASERS OF ECD PRODUCTS ACKNOWLEDGE THE INHERENT RISKS ASSOCIATED. ECD MAKES NO REPRESENTATIONS THAT ITS PRODUCTS CAN REDUCE OR ELIMINATE ANY SUCH RISK. ECD PRODUCTS ARE NOT FOR STREET, HIGHWAY, OR AIRCRAFT USE and are intended ONLY for race vehicles operated on closed-course facilities or race tracks with appropriate supervision of qualified technicians or mechanics to ensure that the safety needs of the race driver and others are met. ECD products could be combined with other products or parts which may not be suitable and could adversely affect performance of other race parts or the vehicle. The user shall determine the ultimate suitability and safety of the product for its intended use, and the user assumes all responsibility and risk in connection therewith.
View full details