2023 Dodge Challenger Demon 170 Automatic HD 1350 Series Carbon Fiber or Aluminum Driveshaft

Made to Order 1-2 Weeks Lead

Application: DEMON 170 ONLY! 

Product Description:

Demon 170 Carbon Fiber 1-Piece Driveshaft is made with 3.5" ID x .186” wall (3.872”OD) Performance Tubing, performance 1350 series solid cross non greaseable u-joints, aluminum bondable yoke shaft and spline sleeve assembly, bond yoke, Aluminum flange yokes, and 1 HD 7075 Aluminum Adapter Plate Included for Transmission output. Hardware with Loctite is also included.

Our Demon 170 Aluminum 1-Piece Driveshaft is made with Sonnax KDS4-T8 -4”OD x .125” wall (4”OD) Tubing, performance 1350 series solid cross non greaseable u-joints, aluminum yoke shaft and spline sleeve assembly, sonnax weld yoke, Aluminum flange yokes, and 1 HD 7075 Aluminum Adapter Plate for Transmission output. Hardware with Loctite is also included.

All driveshafts are high speed balanced for performance application. Each and every carbon fiber driveshaft is also torque tested before shipping. This ensures the bond is solid and your driveshaft will hold up under high torque application. 

These are designed from the ground up and are demon 170 specific to the transmission and differential. Direct mount flange for the differential and 7075 Aluminum adapter to flange on transmission

KEY FEATURES FOR DEMON 170 1-PIECE DRIVESHAFT 

•  Carbon Fiber made with 3.5" ID x .186” wall (3.872”OD)
• We use a 2024 aluminum bondable yokes from Composite Drivelines for additional strength vs traditional 6061 aluminum

• Aluminum made with Sonnax KDS4-T8 -4”OD x .125” wall (4”OD)

• Weighs only 21lbs vs 48lbs OEM factory unit and is built to handle nearly 2000hp.

• We use direct bolt in adapter flanges from Composite Drivelines and SONNAX instead of high speed CVs that require additional adapters and hardware

• We use only NEAPCO Performance 1350 series solid cross non greaseable U-Joints in all of our performance and racing shafts.

• Transmisson Adapter Plate made out of HD 7075 Aluminum

**Please keep heat in excess of 240 degrees away from bonded areas for extended periods of time. While it is uncommon to see these temperatures under a moving vehicle, we highly recommend heat shielding/insulation, exhaust/header wrap, to create a barrier of protection. Shafts that fail due to improper heat shielding and subsequent thermal degradation of bonding agent are not covered by warranty.

Please check for any clearance issues. Check the driveshaft tunnel for any bolts, heat shield rub, exhaust clearance, shifter clearance, etc. Make sure nothing rubs on the driveshaft. This is your responsibility. Any damage done to the driveshaft from clearance issues is not covered and voids all warranty

*Due to circumstances beyond our control, the supply chain is very broken. Back orders are unfortunately impacting all industries with extensive lead times. We will do our best to purchase all parts as listed by vendor, but from time to time other vendors may be used. If this is the case, we will give you an option to use the currently available parts, or wait until the listed parts come in. We only use the very best components in our driveshafts!

At East Coast Driveline, we specialize in custom-made Dodge Challenger Demon 170 driveshafts, meticulously engineered for superior performance. Our upgraded driveshafts are crafted from high-strength carbon fiber and aerospace-grade aluminum, ensuring an unbeatable combination of durability, lightweight construction, and enhanced torque capacity. Designed for Demon 170 enthusiasts who demand the best, our driveshafts reduce rotational mass, improving acceleration, handling, and overall drivability.

Our carbon fiber driveshafts provide exceptional resistance to torsional flex, minimizing power loss and maximizing horsepower to the wheels. The aluminum options offer a cost-effective alternative while still delivering high performance with reduced weight compared to stock driveshafts. Whether you're looking to shave precious seconds off your quarter-mile time or simply want the most reliable components under the hood, East Coast Driveline's driveshafts for the Dodge Challenger Demon 170 are the ultimate upgrade.

Each driveshaft is precision-balanced to eliminate vibrations and ensure smooth operation at all speeds, making it an ideal choice for both street and track applications. With our commitment to quality, you can trust that our custom driveshafts will withstand the rigors of high-performance driving, offering longevity and reliability that meets or exceeds OEM standards.

- Dodge Challenger Demon 170 driveshaft
- custom Demon 170 driveshafts
- carbon fiber driveshaft Demon 170
- aluminum driveshaft Demon 170
- East Coast Driveline Demon 170
- high-performance driveshaft Dodge Demon
- upgraded Demon 170 driveshafts
- Demon 170 carbon fiber driveshaft
- lightweight driveshaft Dodge Demon
- custom driveshaft East Coast Driveline