East Coast Driveline
New Front and Rear SEVERE Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshafts with Solid U-joints
New Front and Rear SEVERE Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshafts with Solid U-joints
Couldn't load pickup availability
Product Description
New Front and Rear Severe Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshaft with Solid U-joints
Application: 2007 to 2018 Jeep JK Wrangler's 2 or 4 Door Models up to a 6” Lift. These driveshafts are custom made so if you have altered the Rear differential, or transfer case example: [Dyna track housings, Spicer Ultimate 60's or Atlas Transfer cases] we can accommodate you. We will just need to know this Information after you have ordered.
***If over 6” lift: Once order is placed Front and Rear Differential and Transfer Case Yokes will be shipped to you for measurements. Must measure from center of new differential yoke to flat of new transfer case yoke for both front and rear driveshafts. Once measurements are sent to Sales@ECDriveline.com, driveshafts will be made and shipped within 24 Hours.
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5", have installed a different T-case, or a Different Differential we will need you to get us a measurement.
These Severe Duty Solid 1350 CV Driveshaft will work up to 44" Tall Tires. After that you would need to go with our [Insane Duty 1410 Solid U-joint Series] that is coming soon. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
This Item will include the following parts:
[1] 1350 Solid U-joint 2 1/2" X .095 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
[1] 1350 Solid U-joint 2" X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Welds due to Torque.
[1] 1350 Front Transfer Case Output Shaft Yoke.
[1] 1350 Front Dana 44 Pinion Yoke.
[1] 1350 Rear Transfer Case Output Shaft Flange Yoke.
[1] 1350 Rear Dana 44 Pinion Yoke.
[2] Set of 1350 U-bolts.
[1] Set of Grade 10 CV Bolts. There is Eight bolts with small heads so they are easier to install.
![New Front and Rear SEVERE Duty Jeep JK Wrangler Rubicon or Non Rubicon 1350 Series CV Driveshafts with Solid U-joints](http://ecdriveline.com/cdn/shop/products/image_f07f0b71-f956-499b-9d8b-1f31879f02dc.png?v=1673023838&width=1445)