2006-2008 Chrysler 300C SRT-8 HD Aluminum or Carbon Fiber 1 Piece Driveshaft with 4 Bolt Direct Mount Flange in Front and 3 Bolt Direct Mount Flange on Rear

Made to Order 1-2 Weeks Lead to Build and Ship

Made with 3.5”x.125” Aluminum, 4”x.125” Aluminum, or 3.5”idx.155” HD Carbon Fiber (Outside Diameter is 3.81”) 

All shaft options are made with 1350 Series U-joints front and rear. Adapter plate in front to convert 4-bolt Coupler to Billet Aluminum Flange Yoke. Direct Mount Billet Aluminum 3-Bolt Flange Yoke in rear.

*****IF 1000HP or MORE WE RECOMMEND THE 4” ALUMINUM & 3.81” CARBON FIBER*****

This shaft will replace the stock 2-piece shaft and eliminate the disconnected feeling you get from the stock shaft with its Giubo (rubber drive) and soft hanger bearing rubber. The stock shaft has to have the Guibos twist, then the hanger bearing moves up, and only after all this happens the car will start to move. The response from the gas pedal will be more responsive and will increase 60ft times at the track.

Overall Length of Driveshaft from end to end is 74”